Hello, i have an issue in EWM 9.00 recently i installed NW 7.31 and apply all EWM ADDONs, i need all de system in ES(spanish) language, actually all system already have this language but all tx and programs sued by SCMEWM 900 components are in english.
I have both languages installed, and system language = S / second = E, in profile parameters, the installation note of EWM said all languages are included in SP01 of this aplication but i can not activate this.
Help!
Hi,
If we are going to use EWM instead of WM, can I still use the same BAPIs to trigger Goods Movements?
or do I need to use other BAPIs?
Thanks.
Andy
Hello SAP GURUS!! 
I need your expertise in the following,in my warehouse when the guys have completed the picking and trying to goods issue the dispatch HU an error message "Available quantity for product ****** is insufficient" i have implemented SAP note 1945664 and have taken the transport through and we still getting the same error.
Is there anyone who has another solution to this?
Your response and help will be greatly appreciated,
Regards
Leonard
Dear all,
while transforing material from ECC to EWM following getting message
No supplying plant defined for product 00000000000 0001648
Message no. SR053
i go through all scn earlier posts and solution but did not find solution could any one provide solution for this .
regards
rsk
Dear All ,
Greetings for day
Kindly guide me below error while scrapping.
Thanks
Jinoy
This list contains interesting and important notes that should be considered during EWM implementation projects - special focus on enhancements/custom developments in EWM. The List will be updated from time to time.
Deployment, Configuration, and Performance | |
|---|---|
| 1606493 | SAP EWM Deployment Options Best Practices |
| 1423066 | Optimization of the performance in EWM |
| 1422086 | RF response times when you use HTTP communication |
| 1465477 | Legacy System Integration with EWM Delivery |
| 1290309 | Log functions in EWM |
| 1320398 | Log functions in EWM: Basics |
| 990638 | Requirement for processes with batches in SCM-EWM |
| 1633933 | Master data creation in ERP for preconfigured warehouse W001 |
| 1634564 | Master data creation in EWM for preconfigured warehouse W001 |
| 351303 | Transfer of additional deliv. data in decentralized scenario |
| 1423321 | Recommendations for using ERP-EWM integration |
| 974852 | Stock data transfer using transaction /SCWM/ISU |
| 1600871 | PDO: Prevent outbound delivery (order) split |
Custom Development in EWM | |
| 1414179 | Technical documents for software development in EWM |
| 1451135 | Transaction control in EWM: COMMIT and CLEANUP |
| 1405108 | FAQ: Procedure with various error messages> |
| 1064376 | Customer-specific determinations/validations of the delivery |
| 1436107 | Assertion to detect duplicate delivery postings |
| 1451692 | Prerequisite to see that data not saved/saved several times |
| 1462811 | Identifying multiple or missing saving: Delivery |
| 1461585 | Usage of dlv status values in schedule and start conditions |
Hi Friends
I need your help to clear my understanding about the Packaging specification
From help I know , in this master data we can define the packaging requirements of a product (single level or nested) and further this data can called in different processes using condition technique. While looking into the system , I can see different condition types availble for Inbound , palletization and outbound , warehouse task
I created a single level specification where I specified 100 EA of a product will be packed in a packaging material. I defined OPAL, OIBD and OWHT condition record in the packaging specification with Supply unit and product details.
Now if I create an ID of 130 EA.
Will system create two HUs (100 EA and 30 EA) during the packing function ( Manual Packing) or it will create two WT at the time of final putaway ?
Also I am not clear why there are different condition type for different processes ? I can use the same condition for palletization and inbound process but not sure why different conditions are provided here , I would appreciate if you can help me to understand this..
Thanks for your help
Mahima
Hi all,
I tried Goods Return (Sales) without any reference document (Invoice). The goods have received in warehouse in proper storage location and ATP(Available To Promise) is also increased. The only problem is Credit note cannot be generated. I tried to create credit note manually, but no result.
Tcode used : VA01
Order Type : ZG2
Returns with ref. to : w/o Original
Please tell me how to get credit note in this process.
Thanks,
Karan
Hello,
In Layout oriented storage control for out bound process, I removed the HU at intermediate storage type as pick point and removed partial qty as per the OBD and completed whole process. This is OK as per the POSC setting. Now my original HU iwith remaining qty is still at pick point. I need to place it at original storage bin. I can easily do it with manually with WPT 9999. But if I want that, system should create warehouse task automatically from ID point remaining qty in original HU to original storage type-BIn. Is there any setting for this? In other word, how can I configure the system to create 3rd task automatically to put away remaining qty from pick point area to original storage bin of product?
Thanks,
Milind.
The field 'Created On' is familiar to SAP users. However, this field is not seen on some regularly used selection screens of Extended Warehouse Management.
We were handicapped by lack of this field while searching for deliveries that were yet to be goods issues on /SCWM/MON transaction. Alternately, we used /SCWM/PRDO to both 'search' and 'goods issue' actions. While /SCWM/PRDO has the 'created on' field, it is not tuned for faster search like /SCWM/MON transaction according to SAP.
We recently took up the case with SAP who actively listened to our need and understood the benefit to business users. We were happy to get the SAP Note 1991270. This note introduces the 'created on' field in the Outbound Delivery Order Node.
http://service.sap.com/sap/support/notes/1991270
Hi guys,
I'm trying to set up an AII and an OER systems that are able to cater to deliveries that contain Handling Unit. Do any of you have any idea how is this possible? I'm not exactly sure but I'm guessing some kind of EWM add-on needs to be installed since there isn't any option to configure HU in AII and OER. Thanks a lot for the help!
Best regards,
Chin Hun
Hi There,
I have defined the No. Ranges for EWM Whse, but while creating the Whse Tasks, it is giving error saying that the No. Ranges are not maintained.
Do we have to maintain Bin Access also while doing simple put away? Please find below all the screen shots.
It is showing source bin and destination bin, but Whse Tasks are not being created. Please suggest.
Thanks,
Vijay
Hi,
I am trying to learn Extended Warehouse Management.
I have IDES Ehp4, ECC 6.0 system. I have activated the Business Framework for Extended Warehouse Management.
I have done those configurations necessary from ERP side.
What do I need to do to Install or activate SCM in ECC6.0?
This is because I found that all those transaction codes which starts with /SCWM/.... are SCM specific.
Those transaction code doesn't exist in my ECC system.
What additionally I have to do so that I can run it in IDES system?
Thanks,
Amit
Hi All,
We are using Motorola MC9190 device and trying to use RF screens .
Initially layout issues were there but we tried to make width = 240 in the meta tags.So fields are appearing properly .
But push buttons always going down and every time user has to scroll the vertical bar. Even though lot of space available between last field and the buttons but still the buttons or messages are not shown at first glance.
Could any body help on this. How to remove the space or move the buttons up immediate to last field and also is there any way where we can hide the menu bar which comes down . Because while scrolling , user by mistake pressing menu bar icon .
Thanks,
Srikanth.A
Hi Experts,
I am in abap and I got the requirement where I need to do the unpick of the picked quantity for an delivery item and after the unpick it should get updated back in delivery.Please suggest me by technical point of view. how can I meet this requirement?Please suggest.Thanks!!
Regards
Mrinal
Hello guys,
I am trying to create a inbound delivery in ECC and send it to EWM. I have created the delivery. But the CIF is failed in SMQ2 in ECC. The queue status is "SYSFAIL". When i double click on the "SYSFAIL" work it gives me message "Function module not found." Message - SR053.
When i checked ST22 for dumps- there is a dump created with runtime error - CALL_FUNCTION_NOT_FOUND and text Function module " " not found.
I checked SM58 - tRFc monitor - i can see the RED error message - Error during the retrieval of logon data stored in. Now the target system on this tRFC is WORKFLOW_LOCAL_800. 800 refers to my ECC client. When i double click on the client it takes me to SM59 and i get a message below saying - User password invalid for identifier /RFC/WORKFLOW_LOCAL_800 (see long text) SR128.
I ran SM59 transaction and expanded "Logical connections" folder and located partner WORKFLOW_LOCAL_800 (connection type L). When i click on change mode it doesnt take me to CHANGE mode but the partner details open in DISPLAY mode with message - User password invalid for identifier /RFC/WORKFLOW_LOCAL_800 (see long text) SR128.
In the logon and security tab the user set is WF-BATCH and password status is invalid. Now i can create a new password for WF-BATCH. But if SM59 doesn't open me in the change mode then how am i going to change the password for the partner ??
I have SAPALL and SAPNEW for my user iD.
Please provide suggestions. This is kind of freaking me out.
Thanks
Hi,
When i execute tcode VL32N - put inbound delivery number - Select pack - put packing material "pack_box" - enter some handling unit .. i get below errors.
When : handling unit - 0 - error "Handling unit 0 already in existence"
When : handling unit - 1 - error "The check digit of SSCC 1 is incorrect. 0 is correct"
When : handling unit - 9 - error "The check digit of SSCC 9 is incorrect. 0 is correct"
When : handling unit - 654 - error "The check digit of SSCC 654 is incorrect. 9 is correct"
Please help to remove these errors.
Regards,
Hi Experts,
I am working on TCD scenario with ref. to a Sales Order without Storage Control. I am able to get pair of documents created in ECC (Inbound Delivery and Outbound Delivery). But these documents not able to get distributed to EWM. SMQ2 show the following error.
Could not determine a supply chain unit for ERP warehouse number KS1
Message no./SCWM/ERPINTEGRATION018
Diagnosis
The delivery document from ERP contains a plant for which Extended Warehouse Management (EWM) cannot
find a corresponding supply chain unit.
System Response
EWM does not create an EWM delivery document.
Procedure
Define the missing supply chain unit. To do so, on the SAP Easy Access screen, choose Extended Warehouse Management -> Master Data -> /SCMB/SCUMAIN - Maintain Supply Chain Unit.
-------------------------------------------------------------
KS1 is my cross docking WH and this WH has SCU and maintained in above path and also has hierarchy maintained. As mentioned in error, Plant in delivery document is Plant1 (Supplying plant) and WH is Cross Docking WH.
Supplying plant has SCU maintained in EWM, otherwise my initial Outbound Delivery could not have got processed in EWM.
Please suggest what setting that I am missing.
Appreciate your help in this regard.
Thanks
Mahesh.
Hello Folks,
For ODOs with atleast one text line item, when the picking is initiated with respect to warehouse order the picking goes into hanging state reason is for the text line item the DOC ID is not established so the query in the table /SCDL/DB_PROCI_O with ITEM ID is hanging.
Any suggestions for rectifying this...
Regards
Animesh Sundriyal