Dear all,
I'm currently working in a ERP/ EWM landscape.
While running the /scwm/erp_stockcheck from ewm, it has generated a 711 mvt to ERP.
I would like to know what kind of differences exists between ERP and EWM than can explain that mvt ?
In a most general way, is there a document that explains the liink bewteen differences and generated mvt type ?
Thank you for help,
Kind Regards
Morgan
Hi All
As a part of initial master data upload to EWM system, I am CIFfing batches.
I wanted to CIF only those batches for which stocks are available. When I CIF batches for the material, system is pulling all the batches which were created for that material. But I have stocks for that material for only few batches. All other batches I am not going to use at all so I don't want to them in EWM system.
Is there any way in standard system for my requirement.
Thank you in advance.
Hi all,
I have a problem creating Inbound delivery notification in EWM. I am using tcode VL31N to create inbound delivery, erp system create the inbound delivery and gives the message "shipping notification 18.......... was saved and distributed to the WMS".
but in EWM I cannot find the inbound delivery notification in tcode - /scwm/prdi. Also I am not getting any logs in slg1.
Is there anyone with an idea? Please suggest some help.
Thank you!
Dear experts,
when i try to create warehouse tasks, the following error appears:
"No bin search possible. Storage types/sections/bin types incomplete"
I have no idea what configuration is missing..
can somebody help me ?
Best regards,
Eike
Hello all,
I am trying to generate a SSCC number for an HU. I have defined the settings at warehouse level, number range object /scwm/sscc, internal and external intervals etc. Maintained the number range for the internal interval as well.
Now when i generate a new HU in /scwm/pack, i expect the HU to use the SSCC number range but its not doing it. Instead it is looking at the number range assigned to packaging material type which I am not maintaining hence it is failing.
We do have some other warehouse in system where number ranges at pack material type are maintained.
Cant figure out why system is not proposing a number from SSCC number range.
Any ideas or hints? thanks in advance.
Regards,
Amit
Dear experts,
in the following situation i try to stage materials of a production material request into my PSA. (Yes i am using the advanced production integration of EWM 9.2 
)
When i am executing transaction /SCWM/STAGE the following protocol is given:
Does anyone know, what kind of configuration is missing ? Or other ideas what causes this error has ?
Best regards
Eike
Hi Gurus,
I am getting the following error "No classification is possible for the object data" when i try to create batch in EWM.
I have done required configurations and CIFed product, class, characteristics and organizational area at a time.
Please help me what else i might be missing. I dont want to create batch in ECC and want in EWM only.
Thank you....
Srini
Dear experts,
i use the advanced production integration of EWM 9.2 and i have staged some materials in the PSA.
Now i want to execute the "Consumption by Production" and i am looking for the Desktop UI.
The official SAP documentation just contains a path in the NWBC menu which doesn´t exists:
EXECUTE --> Consumption by Production --> Consumption by Production
Can someone tell me why this path doesn´t exists in my menu?
Primary i am interested in the tcode for the UI to post consumption by production.
Kind regards
Rodrigo
PS: i already found the RFUI transaction, but i want the desktop UI.....
Hi guys,
I have a question regarding returns processing, and especially about the follow-up action on ERP side.
My scenario: I create a returns order (VA01) and Outbound Delivery (VL01N) in ERP. In EWM, an Inbound Delivery Notification and Inbound Delivery are created. When I process the Inbound Delivery, I can enter an Inspection Result and follow-up action during the QIS-step. For example, if the goods are OK, the follow-up action is Putaway.
In EWM this works fine, the goods are sent to a putaway location with the correct status. However, when I check my qRFC monitor, I can see that a message for this delivery is stuck in the Inbound queue of my ERP-system. The following error message is displayed:
Default follow-up activity for returns delivery xxxx must not be initial. Cannot create inspection outcomes for RMA and delivery xxxx
It looks like I need to customize some follow-up action on ERP side, but I'm not sure how. Any ideas?
Regards,
Oliver
Edited by: O. Hahn on Jan 23, 2012 5:10 PM
Dear experts,
is there any possibility to clear the PSA in EWM 9.2 without using the NWBC-menu ?
Kind regards
Rodrigo
I am looking for solutions to do direct integration to the EWM API's from my MES system.
Is there any known way to do this?
Hi
I have a WM system with stocks inclusing of HUs because one of my WM managed storage location is also HU managed.
Now, I have converted WM storage locations to EWM and removed HU management indicators were earlier HU managed and completed all necessary configurations and system is working smoothly (i.e. any inbound/outbound deliveries created in WM managed storage locations are now being distributed to EWM and vice versa along with HUs created either in ECC or EWM systems)
I have uploaded the stocks to EWM system using transaction /SCWM/ISU without an update to ECC system. The stocks uploaded are inclusive of HUs existing in ECC stocks.
When I am trying to issue the HU stocks (which are newly uploaded to EWM) against any customer outbound deliveries using pick WT and do PGI in EWM system, I am seeing the an error (HUSELECT005) in SMQ2 of ECC system for the outbound delivery.
HUs I have chosen for picking are existing in WM system as SUs (in LQUA table) and also in EWM system (uploaded using ISU transaction.
Am I wrong anywhere here.
Depleting the stocks from WM system and then connecting that storage location to EWM system and then uploading hte stocks again into EWM system might work for me but SAP has already provided direct stock upload using ISU transaction without disturbing the ECC stocks.
I have following this direct stock upload to EWM system.
Would you please help me in resolving this issue.
Thank you.
| Company | Reference Slide | Success Story / BTS | Article | Recorded Customer Presentation | Video |
|---|---|---|---|---|---|
| Artoni | Artoni Reference Slide | Artoni at SAPPHIRE 2011 (log-in required) | Artoni Video | ||
| BASF | BASF in MM Logistik | ||||
| Caterpillar Logistics Services | Cat Logistics Reference Slide | ||||
| Centrica (British Gas) | Centrica Reference Slide | ||||
| Coke Sweden | Coke Reference Slide | ||||
| Dansk Supermarked | Dansk Reference Slide | Dansk Video | |||
| European Salt Company | ESCO Success Story | ||||
| EvoBus | EvoBus Reference Slide | EvoBus Success Story | |||
| Ferrero | Ferrero Reference Slide | Ferrero Business Transformation Study | |||
| Festo | Festo Reference Slide | ||||
| Ford Motor Company | Ford Reference Slide | ||||
| Humana | Humana Reference Slide | Humana Success Story | |||
| Indigo | Indigo Success Story | Indigo Video | |||
| Maple Leaf | Maple Leaf at SAPPHIRE 2011 (log-in required) | ||||
| SFS Services | SFS Services Reference Slide | ||||
| Ernstings Family | Ernstings Family (DE) | ||||
| WM Group | WM Group Reference Slide | ||||
| Wollschlaeger | Wollschlaeger Reference Slide |
Hi Experts,
Pls throw some light and give me inputs in solving my issue.
My Scenario is STO (Plant to Plant within comp.code) integrated with EWM:
1. Created STO: (Supplying plant/sloc and Receiving plant/sloc are EWM managed)
2. Created Outbound delivery: Distributed successfully to EWM
3. Done the all activities in EWM like Picking, Loading & Goods issue
4. In ECC stock is not reduced and no update of Mat.doc/indbound, and still the ECC Outbound delivery is in open status
5.If I want to try post MIGO wrt Outbound or STO PO is also not possible as my Outbound delivery is greyed out (once its distributed, its not allowing to change).
Thats how I got struck. Dont know what to do, If I am right I followed the correct process.
Thanks to All
Srinivas
Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@M
Dear Experts
When I try to run the production supply, system does not find the Production Material Request.
Checking the Doc status related to staging are blank
DMP Planning Staging Production
DMS Staging Production
I have activate the Status Profile
/SCWM/PWR
/SCWM/PWR_CMP_CO
/SCWM/PWR_CMP_SO
/SCWM/PWR_OCP
Resend another Production Material request, but still not updating with NOT started.
any suggestions?
/SCWM/PSASTAGE - Assign Bin to PSA/Product/Entitled in Warehouse Number is updated.
many thanks
Natalia
Hi,
I am new to SAP EWM.
How to check for the smartform in EWM for shipment i.e. t code /SCWM/TU.
My requirement is to assign the create a BOL smartform and assign it at the time of 'Check out', after the delivery is assigned.
I also wanted to know whether is there any Driver Program for Shipment BOL Smartform.
ReGaRdS,
Dinesh
Dear Gurus,
I want to map handling unit IDs to material numbers (MATNR from /SAPAPO/MATKEY). How can I do this? Which tables do I need to join with /SCWM/ORDIM_C?
I found attribute MATID in table /SCWM/ORDIM_C which contains 32 digits and is a hex code. There's also an attribute MATID in /SAPAPO/MATKEY but this one has 22 digits and is a string.
Regards,
Mike
Hello,
I need EWM Roadmap for my presentation. I searched forum but only found strategy till 2014 which i already have.
Maybe Matthias would help? 
Basic words can also help(must be official). Because i have to translate them into Turkish, i can't use your document directly.
What i require;
- Main goals about next releases
- Future plans(for the next 3 years)?
Please help,
Best regards.
Serhan.
Dear Colleagues,
Has anyone configured functionality in which for every ODO, there is only one wave creation?
If you have,are you happy to share some knowledge?
All help, greatly appreciated !
PAPJ11