Quantcast
Channel: SCN : All Content - SAP Extended Warehouse Management (SAP EWM)
Viewing all 1703 articles
Browse latest View live
↧

POSC outbound no automatic WT creation

December 21, 2013, 7:01 am
$
0
0

Hi Experts,

 

I have some questions regarding the configuration of outbound POSC if anyone can kindly throw some light.

 

Outbound POSC is determined by WOCR, I have done the following but still only one WT was created:

1. Configured storage control OUT1 with step(Pick, Pack, Stage, Load)

2. Assign the storage process to WOCR for the activity areas where each process step taken place.

 

Could anyone throw some light on what logic have I be missing? I supposed the above storage process will create 3 WT?

 

I really appreciate for the help.

 

Best,

Eddie

↧
Search

Inbound delivery quantity is not reduced in ERP system

December 22, 2013, 9:31 pm
$
0
0

After distribution of the ERP inbound delivery to eWM system - goods receipt done with correction. Consider I am distributing quantity of 100 pcs from ERP to eWM system.

 

goods receipt correction was done for 20 pcs with process code I001.

Now the inbound delivery item quantity is updated with quantity as 80.

 

Corresponding ERP inbound delivery posting is failed. The quantity in inbound delivery line item is not updated with adjusted quantity.

 

the idoc which has triggered from eWM is carryoing the quantity of 100 pcs only.

 

Any idea how to correct the situation?

 

Regards

Sastry

↧
↧

HU is not proposed automatically in process step OB01

December 24, 2013, 10:10 am
$
0
0

During creation of warehouse task for picking system is not proposing source HU.

 

Storage type is maintained with Level of Avail. Qty as Highest-Level HU,

 

Control for HU picking is maintained as Propose Source HU as Destination HU.

 

Is there any additional settings needs to be maintained?

 

Regards

Sastry

↧

In POSC - Outbound Process

December 24, 2013, 1:34 am
$
0
0

IN POSC outbound process I have a query.

 

 

While creation of the warehouse task for the process step OB01 how the destination bin is determined?

 

Storage process : OUT1

Steps: OB01, OB02, OB03

 

 

regards,

Steve

↧

Configuring PPF actions for printing inbound delivery (Production Order process)

November 5, 2013, 4:16 am
$
0
0

Hi All

 

Please help/guide me to configure PPF actions for printing inbound delivery. I have made configurations but that is not getting triggered when I create an inbound delivery.

 

Configurations made:

TCode - SPPFCADM

Application - /SCDL/DELIVERY

 

Define Action Profile and Actions:

Action Profile: /SCWM/PDI_01

Action: /SCWM/PDI_01_UNLOAD_LIST_PRINT

Processing Type: SmartFormPrint (Using form /SCWM/LOAD_INSTR, class /SCWM/CL_PROCESSING_SMARTFORM, method PROCESS_UNLOAD_SMART_FORM)

 

Condition configuration:

Scheduling condition: /SCWM/PDI_PRINT_UNLOAD

 

Test Steps followed:

ECC:-

Created Production Order and released it.

EWM:-

Created EGR for Prod.Ord.

Created inbound delivery from EGR.

 

 

Please correct where I am going wrong.

 

Thanks

Sasidhar Gupta

↧
↧

TU/DOOR assignment issue

December 31, 2013, 8:06 am
$
0
0


Hi Experts,

I am facing issue while assigning the door to TU. Every time i assign the door, it is prompting with some time which i really dont understand.

I am new to EWM,Kindly help.

↧

Pick HU issue

January 1, 2014, 9:01 pm
$
0
0

Pack spec for the product is maintained as below.

 

20 pcs of product is packed into Cartoon and 1 pallet is holding 5 Cartoons. Sales order unit of measure is Cartoon and purchase order unit of measure is pallet.

 

I have created purchase order and subsequently delivery. This delivery is distributed to eWM system. According to the pack spec 1 TOP HU( pallet) and there are 5 low level HU(cartoons) got generated.

 

According to the putaway strategy one storage bin holds the TOP HU and corresponding low level HU's.

 

from inbound point of view is working as per expectation.

 

I have created a sales order for 2 Cartoons and subsequently a delivery got created and distributed to eWM system. ( requested quantity is Cartoon).

 

when I created the task for picking process system has proposed source bin and source HU as the TOP HU.

 

When I tried to create+save the warehouse task system system is referring to provide low level HU and pick HU details ( correct).

 

Here I am creating a dummy HU ( and trying to pick both 2 lower level HU) into pick HU.

 

After creation of ware house task when I check the pick HU details there are no low level HU's. ( I am expecting the pick HU should contain two low level HU's.).

 

When I create two HU's manually and at that instance system is allowing to move the pick HU''s into new HU's.

 

Is it the case we are using Pick HU is only used for picking purpose without HU details and move the quantity to work center and there we need to pack the goods ?

 

am I missing any configuration settings including pick HU logic?

 

thanks for your help..

↧

Connection between SAP EWM and Non SAP system

December 3, 2013, 3:45 am
$
0
0

Hi All,

 

We have a requirement where we need to create inbound delivery from non sap system in EWM.

 

The main reason is to upload or take stock from non sap system but not from ECC.

 

So we want to use SAP EWM - Non SAP connection option and need to create inbound delivery with out sending or

checking ECC system so that we can put away the stock in EWM.

 

 

Can this scenerio be achieved with standard ALE setting given as we dont have any option for inbound delivery creation using IDOC or use PI Proxy to get the data and create inbound delivery .

 

Thanks,

Srikanth.A

↧
Search

Party Entitle to Dispose

January 2, 2014, 3:44 am
$
0
0

Hello Experts

When I was creating the Product in EWM (/n/scwm/mat1 ) system is not showing the Party Entitle to Dispose  in Drill down .

I have Checked the tables  /SAPAPO/LOC and  /SAPAPO/LOCMAP and found that - Three are two entries for my plant with two Locations like PLCBLR and SUCBLR.

 

I believe the above this the issue in not showing the plant while creating the product master . Could any one tell me why it is showing twice ?? and Why not it is showing the same for my plant while creating the product master  ? Am I missing any Configuration assignments ?

 

 

Thanks and Regards

Pavan G Kulkarni

↧
↧

Transaction to see IDOCs for inbound and outbound delivery

August 14, 2013, 1:13 am
$
0
0

Hi All

 

I have a very basic question. Currently I am working on the business scenario's as mentioned below.

 

  1. Inbound delivery and outbound delivery gets created in my client's SAP system and data about this inbound and outbound delivery needs to be transmitted to 3rd Party Non SAP Warehouse via middleware through Idocs.

 

For the flow of IDOCs from SAP to 3rd party warehouse we will use standard SAP Idocs.

 

Now my very basic query is that what is the SAP transaction through which I can see standard SAP IDocs to be used for inbound and outbound delivery?

 

I searched SCN for Idoc for outbound delivery and came to know I can use message type DESADV and IDoc type DELVRY03. Now my query is what is the difference between message type and Idoc type and how can I search in system which message type and Idoc type to use for a scenario?

 

Hope I am clear in my query.

 

Regards

SK

↧

TU/door assignment from has overlaps

December 31, 2013, 8:46 am
$
0
0


Hi Experts,

I am facing issue while assigning the door to TU. Every time i assign the door, it is prompting with some time which i really dont understand.

I am new to EWM,Kindly help.

↧

Automatic Pack in Inbound process

December 27, 2013, 12:21 am
$
0
0

Hi,

 

While working with pack specification I encountered with one error in inbound process.

Process scenario is as followed.

The each of product is packed into a packaging material which creates a HU(small box).

subsequently each 10 PCS of above HU's are packed into another HU(Pallet).

packaging specification is maintained with two levels.

ERP system I have created inbound delivery of 12 quantity and distributed to eWM system.

in eWM system according to packaging specification system has generated two HU's.

first top HU - 1000 contains ten low level HU's and second top HU 1001 contains two low level HU's.(worked as expected)

after confirmation of unloading task goods are available at staging area and new 2 tasks are generated.

source is staging area and destination is final bin.

Here system has created two new HU's for two tasks. ( do not know why this was happened?). Ideally the source and destination HU should be 1000 and 1001 for individual task.

when I check any one of the new HU system is taking to me HU details screen and I can see that

top HU is 1001 and low level HU's are new Handling Units.

when I tried to confirm the final putaway task system is throwing error as HU xxxxxxxxxx has a reserved quantity; HU withdrawl not possible

and from monitor when I click on HU details I have my own HU's 1000 and 1001. 1000 HU is with 10 low level HU's and 1001 is

with two low level HU's.

 

 

thanks for your time and valuable inputs..

↧

HU TYPE is not permitted in storage type AZ01

January 6, 2014, 8:19 am
$
0
0

Hi Experts,

 

When i am trying to create a Warehouse Task with an inbound delivery, the system is throwing an error as this.

I maintained necessary strategies.

 

When we see the error, system is able to determine my storage type, but some where i am missing the master data.

I have maintained the HU type in product master data.

 

Kindly help.

 

Capture.PNG

↧
↧

Process oriented storage control

January 6, 2014, 6:15 am
$
0
0

Dear All ,

 

I am trying to execute process oriented storage control steps . kindly refer below screen shots of steps followed.

 

As below my storage process has 3 steps , Unload - IB01 , Deconsolidate- IB02 , Putaway- IB03 .

 

Capture3.JPG

 

My requirement is to complete 3 steps in sequence thereby confirming final inventory to storage bin.

 

 

First step IB01  "unload" in storage process  worked correctly as below .

 

 

Unload.JPG

 

When creating task to move HU i am getting error.

 

Capture1.JPG

 

Capture.JPG

 

I have defined consolidation group as below .

Consolodation group of t051.JPG

 

My Query's are as below.

 

1. Why system is directing inventory to destination bin as it should be executing storage process step2:  IB02 and inventory should have been directing to deconsolidation work center.

 

2. I have defined consolidation group but error persists.

 

Kindly guide me on error , please let me know if you need any further information.

 

Thanks

Jinoy

↧

Hello all can any body help me in 2 step picking

January 6, 2014, 9:02 pm
$
0
0

Hello all ,

 

Can anybody help me in 2 step picking , the scenario is like this :

 

picking > packing > goods issue area (the material flow ),

 

please kindly tell me the configuration steps.

 

Thanks in advance.

 

acs

↧
Search

Direct Inbound Delivery creation in EWM

January 7, 2014, 9:23 pm
$
0
0

Dear EWM Gurus,

 

Is there a way we can create Inbound Delivery in EWM directly (without having an ERP system in place)?

 

I am having EWM system only and need to test few things around goods movement withing Warehouse and Yard activities.

 

I have tried to create ID directly in EWM in /SCWM/PRDI, it failed because VL60 from ERP will be called.

Same is the case with using EGR.

 

Is there a way I can trurn off all RFC calls made to ERP and proceed with Inbound Delivery creation in EWM alone?

 

Regards,

Shashidhar

 


↧

Repetitive use of /SCWM/CL_RF_BLL_SRVC=>SET_LTRANS

January 8, 2014, 4:30 am
$
0
0

In the RF Framework we use method set_ltrans (of class (/SCWM/CL_RF_BLL_SRVC) to dynamically jump between different logical transactions. However in this method the statement CALL TRANSACTION is called. Every time this is done a new gui session is opened. Therefore after the 6th or 7th call (depending on the actual setting of the system) the RF Framework stops with error message "Maximum number of internal sessions".

 

 

Can anyone please advise how to avoid this error? Is there an error in the above mentioned method?

 

 

Any help is appreciated.

 

 

/John Kristensen

↧
↧

Batch Problem in EWM(Batch Valuation does not exist)

December 25, 2013, 7:31 pm
$
0
0

Dear Experts,

 

I have a Batch Problem in EWM,

 

Step1. Transfer Material,Characteristic and Class to EWM-OK

Step2.  Create Batch for Product in EWM - OK

 

 

I can't Display this batch characteristics in EWM,

Show the message Batch Valuation does not exist.


Please check the figures as below:

Batch for Product.jpg

Untitled6.jpg

 

I can Change This Batch Characteristics in EWM,

and I key in Characteristic Value12 in EWM.


Untitled3.jpg

Untitled5.jpg

 

 

When I save this characteristic, it's still show's blank in EWM ,

But I can see the Value in ERP


The characteristics value disapper, after I click save button.

Untitled4.jpg


ERP system can show's value 12 that I Key in

Untitled7.jpg

 

 

 

I have check data integration in EWM and ERP,

 

Problem:

1. How can I display characteristics in the product for batch? How to solve the messageBatch Valuation does not exist in EWM

2. I can change characteristics value in the product for batch.After save the characteristic,it's show blank in EWM

    But I can see the characteristics value in ERP.

 

Thanks for your help!

 

 

Howard

↧

Unable to find WM Execution & WM Package Tabpages in MM01

January 8, 2014, 2:51 am
$
0
0


Hi,

 

We are using ECC 6.0 and it is connected to the SCM 7.0.

We do use EWM funcationality and for that we need to update the two

tabs (MM01) i.e. WM Execution and WM Package.

 

We are unable to find these tabs in the MM01 while maintaining/creation of material (ECC).

 

Please do suggest what need to be done to acheive this.

 

Regards,

Ramana Rao.

↧

step by step POSC in inbound / outbound process

January 8, 2014, 8:55 pm
$
0
0

Hi,

 

Can any one explain the step by step process related to inbound / outbound process..

 

from process and corresponding config in the system steps.

↧
Viewing all 1703 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>