Hi EWM Experts,
I am working in the EWM RF development. In EWM, most of the commonly used function module are with the status 'Not released'. As per best practice, it is not suggested to use 'Not released' function module'. Can anyone help whether can we use such FM or any alternative approach avaiable?
Find below list of FM's,
Regards,
Neel
Hello Team,
I wanted to know that, how to re distribute the data from eWM to ERP?
Example: When I confirm a warehouse Order, GR Interface will be sent back from eWM System to ERP. In case, If we delete those queues in SMQ1/SMQ2 TCode, How to re dritribure those data again to ERP?
I know that, we can reverse GR and Redo GR again. However, I wanted to know the option with out modifying the data, how to distribute?
Regards
Sathish
Dear All ,
Kindly guide as Door, staging area determination is not happening automatically after inbound delivery creation.
currently assignment is being carried out manually , Attached screen shots for your kind perusal.
Thanks
Jinoy
Hi All,
We have a requirement where we need to create inbound delivery from non sap system in EWM.
The main reason is to upload or take stock from non sap system but not from ECC.
So we want to use SAP EWM - Non SAP connection option and need to create inbound delivery with out sending or
checking ECC system so that we can put away the stock in EWM.
Can this scenerio be achieved with standard ALE setting given as we dont have any option for inbound delivery creation using IDOC or use PI Proxy to get the data and create inbound delivery .
Thanks,
Srikanth.A
Dear All ,
Kindly guide me on attached error while CIF ing vendor master data from ECC to EWM.
CFM1
CFM2
Vendor master , where in postal code is maintained.
Thanks
Jinoy
Hi Gurus,
I'm looking for any pointers/checklist to keep in mind when implementing multiple OSS notes in EWM.
We are looking to implement Warehouse Monitor Performance OSS notes like
Note 1786643 - /SCWM/MON: Loading Workload per Route performance issue
Note 1780488 - Performance issue during aggregated quantity calculation
Note 1907536 - /SCWM/MON: Memory leak during handling unit selection
Note 1900368 - PERF: time out when selecting many deliveries in monitor
Note 1845817 - Full table scan on /SCDL/DB_DLVI_O during workload selection
Note 1798762 - Performance in PI progress for uncounted storage bins
Note 1788809 - /SCWM/MON: Calculation of the packaging status is slow
Note 1769616 - Performance when searching for TU activities
Should I be careful about the order in which they go into production? Anything I should look out for in general when implementing OSS notes.
Note: Not looking for transaction codes/method to implement an OSS note, just generic guidelines
We have migrated from ECC WM to EWM 9.0. Is there a way to manage the open documents (like deliveries and shipments) that were created in ECC prior to connecting EWM?
Dear Experts,
Is there any transaction code or program through which we can create products in mass in EWM after they are replicated to EWM through CIF.
After material master is CIF from ECC to EWM, product has to be created in EWM through /N/SCWM/MAT1 transaction before we are able to use the product further in EWM.
How to create the same in mass.
With Regards,
Maaly
Hi Experts,
I know this basic question but need your valuable suggestion.I am MM consultant with knowledge of WM I am looking for EWM certification at associate
level. So need your opinion whether I should go for certification or not with the basic knowledge of WM.
I need the certification material and best place to buy .
Thanks,
Chand
Dear Consultants
I am planning to do the EWM professional certificate on 2nd week of November, pl let me know how the professional certificate differentiate from associate, it would be very helpful if you can share the EWM WM questions to my id sivajanu@gmail.com
thanks
Siva
Hi Experts,
I am using CFM1 and CFM2 to transfer master data such as: material master , Customer, Vendor) from ERP(ECC 6.0 into EWM7.0.
In ERP, these master data has Description in Chinese, but after transfer into EWM, these Chinese characters all display in '#####'.
Who can advise how to transfer Chinese characters from ERP into EWM via CIF?
Thanks in advance.
Julia
Dear All ,
Greetings for day.
Upon confirmation of warehouse task , stock type in EWM gets changed from F1, F2 ie from Unrestricted-Use in Putaway to Unrestricted-Use in Warehouse .
But posting change is not getting triggered at ECC side to flip storage location from ROD, to AFS. Attached screen shot for your kind reference.
Config :
stock report :
MMBE :
Kindly guide incase if i am missing something .
Thanks
Jinoy
Guide where to find relevant EWM 9.1 information
Please read following Posting on the SAP Community Network (SCN): http://scn.sap.com/docs/DOC-49001
I summary of the most important official SAP EWM 9.1 documentation e.g. Application Help, Master & Upgrade, Security, Application Operations Guide, … you find here: http://scn.sap.com/docs/DOC-49002
Detailed information on availability dates, maintenance end dates and upgrade paths, as well as technical release information (supported databases, operating systems, browsers, etc.) for EWM 9.1 you find in the Product Availability Matrix.
Guidelines and recommendations on hardware requirements and
software considerations for your implementation you find here: http://service.sap.com/quicksizer
Integration of Outbound Warehousing and Transportation (Business Process Description, Configuration Guide (HTML)
Planning Labor Demand for Outbound (Business Process Description, Configuration Guide (HTML)
Processing Dock Appointment Scheduling (standalone) (Business Process Description, Configuration Guide (HTML)
Processing Inbound with SAP Dock Appointment Scheduling (Integrated with EWM) (Business Process Description, Configuration Guide (HTML)
How to Use PPF
(Post Processing Framework) in EWM (http://scn.sap.com/docs/DOC-39927)
How to Add Application Content to the Warehouse Management Monitor (http://scn.sap.com/docs/DOC-35822)
How to Configure an Additional Preconfigured Warehouse Using an Additional Plant (PDF).
If you have already set up the standard EWM warehouse with preconfigured processes and now want to add an additional warehouse you use this guide you use this guide.
How to Configure Outbound Process with Full Pallet Removal and SCO (PDF).
If you have already set up the standard EWM warehouse with preconfigured processes and now want to test the removal of pallets, cartons, and pieces from the preconfigured warehouse (small/large quantity removal) and use the shipping cockpit for TU planning and execution you use this guide.
How to Configure Outbound Process with Several Routes, SCO, and DAS (PDF).
If you have already set up the standard EWM warehouse with preconfigured processes and now want to test the integration of the shipping cockpit with SAP
Dock Appointment Scheduling you use this guide.
How to Enhance the Shipping Cockpit (PDF).
This guide provides you with an overview of the main enhancement possibilities available for the Shipping Cockpit and some step-by-step procedures for common requirements.
How To Configure Production Integration (PDF).
If you have already set up the standard EWM warehouse with preconfigured processes and now want to test the EWM production integration you use this Guide.
How to Configure Qarantine Scenarios with EWM (PDF).
How to set up, use and extend exception code to exclude goods from packing (PDF).
The exception code is used to handle products at the packing station that should not be shipped to customers due to damage or pick errors.You use this
guide to configure the process.
Please navigate here to the SAP Service Marketplace to find all published How-To-Guides for SAP EWM
Please find here the SAP EWM 9.1 Online Learning Map. RampUp Customers have about 10 RKT licenses for free. In order to access RKT an email needs to be send to rkt@sap.com (EWM 9.1 RampUp Customers only)
In case of issues with update to Netweaver 7.40 please open a ticket to component BC-UPG-TLS-TLA
In case of issues with Solution Manager / MOPZ pleaseopen a ticket to component SV-SMG-MAI
In case of issues with Add-on Transport please open a ticket to component BC-UPG-ADDON
Getting Started with SAP EWM 9.1
Author: Matthias Keller
This article shall guide you to the most important information to get started with SAP EWM 9.1. Furthermore it points out which new solution manager content and how-to guides are delivered with SAP EWM 9.1.Dec. 6th, 2013
Foundation of German speaking SAP EWM user group within DSAG
Author: Matthias Keller
On Nov. 12th the first dedicated SAP EWM user group meeting took place. During the event the German speaking EWM DSAG user group AG Lagerlogistik/EWM has been officially founded. In a very open minded atmosphere 50 participants from SAP EWM customers, partners and representatives of SAP development and consulting exchanged information, experiences and feedback from their SAP EWM implementation projects and productive installations. Nov. 15th, 2013
SAP EWM 9.1 released for RampUp
Author: Matthias Keller
On Nov. 8th the newest release of SAP EWM has been released to customers for rampup containing major enhancements addressing user productivity like the shipping cockpit as well as major steps towards reducing total cost of implementation and operation like enhanced intergation into SAP ERP Quality Management. Just to name two examples. Learn more about the great new features of EWM 9.1 in this article. Nov. 15th, 2013
SAP EWM 9.1 Documentation available
Author: Matthias Keller
We would like to inform you that the product standard documentation for SAP Extended Warehouse Management 9.1 has been successfully completed and delivered at release-to-customer date as planned... Nov. 15th, 2013
Augmented Reality Glasses @ SAP - Taking Logistics to a New Era
Author: Markus Puchta
Read how SAP co-innovates with customer Bechtle using a Design Thinking approach to create a show case for a mobile application in the area of augmented reality (AR). June 24th, 2013
while execution of outbound process, while releasing the wave system has generated warehouse task.
based on search sequence system has proposed source bin and final destination storage type is determined from wave(9020).
source bin is assigned to activity area and this activity area is linked to Warehouse order creation rule.
in warehouse order creation rule I have assigned storage process. In the warehouse task system has determined storage process and first step of storage process i.e.OB01.
my expectation is the first storage process step is picking task and system should propose the destination storage type as 8030(workcenter)
my understanding is system should replace the destination storage type 9020 with 8030.
when i check warehouse order logs i could see the following messages:
Destination data for 1 WTs must be changed -Message no. /SCWM/WHO069 (green)
No destination storage type exists for work center determination - Message no. /SCWM/UI_PACKING144 (yellow)
Destin. data for 1 WTs not changed due to incorrect bin determination - Message no. /SCWM/WHO070 (yellow)
Can some one throw some light where I am missing logic..and how to correct this?
Regards
Sastry
Hi Experts,
When I successfully created Inbound delivery for PO in ERP for Good Receiving, the inbound was transferred into EWM via qRFC. However the Inbound delivery was failed to be created in EWM with below error ：
Message no. /SCWM/ERPINTEGRATION112
I checked my configuration for Availability Group, seems all are done.
Who can advise where should be checked for this error?
Many thanks!
Julia
Hi Experts,
I am in abap and I got the requirement where I need to do the unpick of the picked quantity for an delivery item and after the unpick it should get updated back in delivery.Please suggest me by technical point of view. how can I meet this requirement?Please suggest.Thanks!!
Regards
Mrinal
While doing packing with RFUI menu I ended with error message as after providing input with work center ended with error message as "E: Select a valid work center". There is no error message number any clue?
Sastry
Dear All ,
Kindly guide as Door, staging area determination is not happening automatically after inbound delivery creation.
currently assignment is being carried out manually , Attached screen shots for your kind perusal.
Thanks
Jinoy
Hi,
I have configured the planned duration parameters for Warehouse task creation under path (EWM -> Cross process settings -> WT -> Define planned duration of movements in Warehouse), in order to determine the planned completion date/time according to the source storage type from which the stock is picked, when the Warehouse task is created.
But when I released the wave, warehouse tasks are not created with the planned completion date/time as mentioned under the above path stated. Instead the planned completion date/time is determined from the departure date/time from yard mentioned in the ODO.
Basically I want to calculate the time taken for the Warehouse order according to the summation of planned duration time of Warehouse tasks (as defined in the above path) associated with that Warehouse Order.
Could you please suggest..?
Regards,
Shravan
