Hallo,
I'm interested in the new MFS solution at SAP EWM. I havent found much information about that.
My question: Do I need SAP Plant Connectivity to realize SAP EWM - MFS? Or PCo is only needed to work with SAP MII?
Thanks in advance.
Regards!
erdalt
Hi EWM Gurus,
Can anybody share the SAP EWM Packaging Specification Upload .csv file format with sample data
Thanks
Ramesh
Hello all,
Can you please advice on following -
Is there any difference in configuration, batch determination or use of batches in EWM when compared with IM and WM?
Is there anything unique behavior at application or additional capability that EWM brings over IM and EWM for batch management?
Regards,
Chaitanya
Hello Experts
I want to automate the process of refreshing the Queues in EWM and ECC which are stuck in SMQ1 , primarily due to lock issues etc and where we have to just execute the Queue to clear it.
Also is there functionality available to get alerts if the stuck Queue exceed some specified limit.
We are using SAP SCM 7.0 (EWM) and SAP ECC 6.0(ECC).
Thanks
Akhil
Hi all,
I'm working with the Production Material Request functionality which is available from EWM 9.2. Got a question regarding the setup for my scenario:
My component stock is stored in storage location ROD, stock type F1. I want to supply this stock to my Production Supply Area, which is setup as a separate storage location (PSA, stock type P2). For this, I'm using the Single-order staging functionality.
I've been playing around with the master data settings in ERP (PSA, Control cycle, work center), and the EWM PSA setup and bin assignment. However, I'm not sure how to make the correct setup.
At the moment, I have assigned the PSA to my ROD storage location. This way, my PMR item knows that it should pick from the ROD location (stock type F1). In tcode /SCWM/STAGE, I've assigned my PSA bin which is linked to the PSA storage location. So, when I confirm my WT, the system moves stock from F1 to P2, and performs a transfer posting from ROD to PSA in SAP ERP.
However, now I'm not able to perform a consumption posting. When I try, the error message states: E: Stock type P2 not found for product in manufacturing order.
This makes sense, because the Production order did not expect the stock in stock type P2 (PSA); it want to consume it from storage location ROD (F1).
Can anyone help me and tell me how to make the correct setup?
Thanks & regards,
Oliver
Hi All,
We are trying to archive spool logs and want to use object type DRAW to be assigned to a document type, but DRAW is not present in EWM, has anyone come across this situation and know why there is no DRAW object type in SAP EWM.
Regards
MS
Hello Gurus,
My client has two ECC systems and they are implementing EWM, is it possible to connect two ECC systems to one EWM system?
I think the question is two fold:
1. Is it technically possible?
2. Are there any limitations or operational challenges with this approach? Are all EWM features available in this case? (I know that CRM when connected to multiple ECC systems loses some of the features so I was wondering if this is case for EWM too)
Thanks in advance for your insight
Hi
I have created TU in outbound and completed goods issue, i have made configuration of printing of way bill, but after completion of TU when i am checking PPF action then Print Way Bill action is coming in Red and showing below error :
Log is mentioned below
Please let me know where i am doing mistake.
Thanks & Regards
Rajeev Jindal
Hello experts,
I am working on VAS Order process. While trying to activate ODM for VAS in IMG-->SCWM-->EWM-->Cross Process Settings-->VAS-->Activate Order Document Management for VAS, I am getting below error-
"Component
VASP
The structure of component VASP could not be generated (DDIF_TABL_ACTIVATE)
Order Data Area
Order component VASP specified (status active: 'X') does not exist"
When I go to SCM Basis-->Order document Management-->Check settings in Order Document Management I get additional information about error-
"The component is inactive
Component VASP contains change mode (OBJCHG)
Structure /SCWM/S_VAS_ODM_AUX does not contain all administration fields
Table type /SCWM/TT_VAS_ODM_AUX uses structure /SCWM/S_VAS_ODM_AUX"
Any pointers will be appreciated.
Kind Regards,
Khushboo
Dear experts,
we are currently preparing for an internal project to implement SCM-EWM with EWM-MFS. We need to interface conveyor as well as high-rack shelf systems. I've already analyzed the current TCP/IP (socket-based) traffic between the control systems and the legacy system. Once again I'm afraid SAP will be too slow.
I've searched many pages but haven't found any indication yet what the standard response time of the material flow control component in combination with PCo is. Scenario: SAP SCM-EWM Server 10 meters away from the conveyor (meaning "no" network delay), Release 7.02, PCo 2.2 connecting to one conveyor controller. No other system load. Telegram of controller saying "I've read SSCC barcode <xyz>". SAP responding: "Send SSCC <xyz> to conveyor area <ABC>". I'm interested in the typical time in ms between these two telegrams.
Any practical experience in that area?
Franz
Hello Experts
Quick question. Is it possible to change storage type for a storage bin using transaction /SCWM/LS02?
Is there any config that needs to change to achieve this change?
Any help is appreciated.
Thanks
Ankit
Hi experts,
we use EWM， when do movement type 551, system will generate delivery note ( DN Type: DOG ,item category :DOGN), but i can not find the delivery in CO09, and table :VBBE; if use movement type 309, the delivery can be find in CO09 and table VBBE; is it a configuration issue? how can make delivery note which triggerred by movement type 551 avaible in VBBE/co09 ? Thank you !
leo
Hello Experts
I am not clear on why we need a Business System in EWM (SCM) but there's none in ECC.
Can anyone pls elaborate on this.
Thanks
Akhil
HI,
While creating the physical inventory document with the PI process (HL- Ad-hoc Physical Inventory (Storage-Bin-Specific)), getting following error
No items passed on
I have checked number range, activity area assignment and sorting and everything is in place.
Please suggest if somebody have faced same kind of problem before.
Thanks in advance.
Sandip
Hi Experts,
Picking Scenario per Warehouse Order based on HU one Warehouse Task should be created.
Configured the WOCR based on
Per for Item - One WO
Per one WO - Limits and filters are set
in Limits defined - Max WTs per HU is one
Packing profile also maintain, and packaging specification is set up at two levels. HU creation is at second level of pack spec as per quality classification of pallet.
But still the system is created one WO with one WT for all pallets.
Kindly suggest where my config is missing.
Regards
Ramesh.R
I want to use IOT5 for inspection of goods in the warehouse. I have configured it to a point, where i am able to set a finding code. I want to record an additional attribute in the finding to later use it in the followup action.
SAP provides the structure QIE_TS_FIND_ATTR and states in the documentation that this can be used to append fields in order to display/change them.
When i add a field to the structure, it appears in the customizing and also the database table for the finding.
But: It does not appear in either /SCWM/QIDPR r /SCWM/QINSP to be used for entering values.
Am I missing some kind of customizing or implementation necessity ?
Best regards,
Jan
Hi,
I am working on Advanced Production Integration in EWM9.2. I have done the configuration as per SAP config document in ERP and EWM. Have created Process order and performed staging. The document is getting distributed to EWM but getting stuck in the queue. I am unable to find the reason for same. SLG1 is also showing the below error only.
"Document $1 does not contain any items; not possible to save
An error occurred when saving the document"
Any help would be great.
Karthik
During the creation of Inbound delivery in EWM through QRFC..the queue is stuck with an error message
" Error accessing product data administration "Message no. /SCDL/AF032""..Please let me know if you have seen this issue earlier.
ECC: Inbound delivery is created
QRFC: Stuck in the queue and error message can be seen through SMQ2 transaction
EWM: No IBN created because of the errored queue
Thanks,
Syed Ismail
PS: Is there a way to create a new section for EWM queries so that they do not get mixed up with regular WM issues ?
Dear Experts,
Can you please let me know if it is worth to install PLC simulator in SAP EWM? Can we have same functionality of PLC simultor delivered without installing it? Also, does SAP recommend installing it?
Thanks and regards,
Sachin Goel
Hello Experts
I am finding a solution to automate the process of Setting Process code for Inbound Deliveries in EWM for which we have not received for more than specific time .
Is there any standard functionality available to do this for MASS number of Deliveries to save the manual hours.
Thanks
Akhil Gupta