Hi EWM Experts,
can you please provide me Cross Delivery HU Table and Field Name?
Thanks
venu
Hi EWM Experts,
can you please provide me Cross Delivery HU Table and Field Name?
Thanks
venu
EWM: Automatic posting of Physical inventory document after entering the count
If the difference quantity is below the tolerance limit, system can post PI document automatically after entering the count .To achieve this, it is required to maintain the set up against Reason for physical Inventory.
Configuration
Spro- Img-SCM Extended Warehouse Management-Extended Warehouse Management-Internal Warehouse Processes-Physical Inventory-Physical-Inventory-Area-Specific Settings-Define Physical Inventory Area
Here ,check the posting after count button. It Indicates whether or not the system is to post the count results immediately after they are entered
2. Assign Physical Inventory Area to Activity Area :
Spro- Img-SCM Extended Warehouse Management-Extended Warehouse Management-Internal Warehouse Processes-Physical Inventory-Warehouse-Number-Specific Settings-Assign Physical Inventory Area to Activity Area
3. Define Tolerance Groups
Spro- Img-SCM Extended Warehouse Management-Extended Warehouse Management-Internal Warehouse Processes-Physical Inventory-Warehouse-Number-Specific Settings-Define Tolerance Groups
a. Define Tolerance Group for Difference Analyzer
b. Define Tolerance Group for Posting Differences
c. Define Tolerance Group for Recounting
4. Define Reason and Priority
Spro- Img-SCM Extended Warehouse Management-Extended Warehouse Management-Internal Warehouse Processes-Physical Inventory-Warehouse-Number-Specific Settings-Reason and Priority
a. Define Priorities
b. Define Reason for Physical Inventory
Here if we select the ‘Autom’ ,there is no automatic posting after the counting of physical inventory documents that are subject to differences and which were created with the reason
the automatic posting of differences into the ERP system is prevented if this is carried out via the transaction /SCWM/WM_ADJUST ("Automatic Posting of Differences ").
If you do not select this checkbox, automatic posting is allowed.
c. Define Reason for Differences
d. Define Standard Reason for Each Phys. Inv. Procedure
Process:
Create a physical inventory document:
Sap Easy access-SCM Extended Warehouse Management-Extended Warehouse Management-Physical Inventory-Create Physical Inventory Document
T Code : /SCWM/PI_CREATE
Process PI document
Here enter the qty with difference and save
Check the PI document status is ‘Counted’ ( not posted automatically )
Now un check the ‘Autom’ from the reason ‘UPLD’
Again create & process a new PI document
Enter qty with difference below the tolerance limit and save the document
Once ‘save’ the document , it can be posted automatically.
C K Reddy
Hello Experts,
I was working on deconsolidation test case for receiving mixed HU's.In my destination storage type i have activated HU type check.I observed that system could not find a suitable bin every time and gave error for creating task for IB03.I have kept HU requirement "X" in storage type settings.
When receiving mixed HUs, HU type check does not work with POSC settings.Once deactivated i had no issues working on scenario.Can someone explain the business relevance?
Regards,
Khushboo
Hi Everyone.
Please support me on below issue.
I am transferring product(qty = 280, which is equal to 4 pallets) from distribution plant/SL to PSA SL.
I am expecting system should create 4 WT and so 4 WO. But system is creating only 1 WT and so 1 WO.
More detail:
WPT used:4ABC(lets say) Tsf FG Rework to Prod Supply
WPT is having:
WO Rule :HU03
Activity: STCH
Also.
Creation Cat.: Pick Path
Item Filter HU03
Limit Value Type: WT
Limit MX01 (Maximum One Item)
Max. Itm per WO 1
Max. CGr per WO 0
Max.CGrp per HU 0
Max. No. of HUs 0
Min. WTs per HU 0
Max. WTs per HU 0
Also, Please find the activity log for WO creation:
Warehouse order creation started
Warehouse order creation is processing:
1 WTs with directly assigned creation rule
0 WTs with search sequence for determining creation rules
Warehouse order creation called up within a process
Creation rule HU03 used for 1 WTs
Creation rule HU03 is of the type "Pick Path"
Item filter HU03 checked
WT 1XXXXX passed the filter
1 WTs passed, 0 WTs did not pass item filter HU03
Inbound WT sorting rule PIPA used
1 WTs passed, 0 did not pass subtotal filter
Limit value MX01 used for 1 warehouse tasks
Warehouse task 1XXXXX passed limit value
Maximum limit value for 1 warehouse tasks was adhered to
Limit values: current values for these 1 warehouse tasks
Limits for items: minimum 0, maximum 1, current 1
Limits for number of HUs: maximum 999, current 0
Resource management called with queue A.INT.FG
Content provider 02 determined for warehouse order 9639
Warehouse order 9XXXXcreated on the basis of creation rule HU03 with 1 WTs
Please support.
Let me know if more information is required.
Hello EWM experts,
i am trying to create the following scenario.
Generate Kit to stock directly in EWM and move the finished kit to a different putaway bin.
the following works
1> The VAS order is created and the IBD/OBD is generated
2> I pick the components for the Kits wrt to the OBD and confirm the WH task
3> In the workcenter for kitting i consume the component and post the finished kit./
4> I pack the finished kit to a HU
Now i want to move the kit automatically to a final putaway bin. However i am unable to do so.
I tried the following config, have create a POSC for the putaway process step with VSKS (kitting step) and IB03(putaway step) with auto creation of WH task set for VSKS. But this is not helping.
Any idea how this can be achived
Thanks
Hello Experts
I want to automate the process of refreshing the Queues in EWM and ECC which are stuck in SMQ1 , primarily due to lock issues etc and where we have to just execute the Queue to clear it.
Also is there functionality available to get alerts if the stuck Queue exceed some specified limit.
We are using SAP SCM 7.0 (EWM) and SAP ECC 6.0(ECC).
Thanks
Akhil
Hello ,
I am trying to configure process of Kit to stock. I have created BOM material and after releaseing production order system is creating Delivery type DOG which is getting replicated in SAP EWM.
In many references i have seen that delivery of type HOD is created. Can you tell me the difference between these two?
I have not created control cycle for these materials?
Please guide
Thanks,
Pramod
Hi experts,
we have one plant in EWM. One sales org assigend to this plant in ERP, so in delivery note printed in EWM, footline is based on this sales org.
Now another sales org is delivering from this plant (via intercompany business)...so also footline for example should show data from this different sales org.
How to handle this? Maybe I'm blind, but didn't find a solution until now.
Thanks
Michael
while extracting data from table /scdl/db_refdoc is taking long times.
some this this is going for dump also.
in selection parameters of reference document - I have provided only one ERP inbound delivery document number.
any specific reasons ?
Sastry
Dear expert,
I have a question about the RF manual Selection by WO.
e.g.
1. a warehouse order is assigned to queue Q-01-01
2. resource 'ABC' is assigned to resource group 'GRP_01'
3. resource group 'GRP_01' is assign to queue Q-02-02
Can the resource 'ABC' take this warehouse order by RF menu 'Selection by WO'?
Thanks and Kind Regards,
Clark
Hello Experts,
I have created ID in ECC and it gives the message successfully distributed to WMS.
But when i check in EWM system i didn't find any document.
Also i checked both smq1 and smq2 but didn't get any queue.
When i checked SLG1 i found below entries :
Please check if anybody have came across this issue .
Regards,
Hi Experts,
Are we supposed to schedule batch jobs using below programs for CIFing delta changes?
1) RIMODDEL - Delete old inactive model if any (Optional)
2) RIMODINI - Initial data transfer
3) RIMODGEN - New model generation
4) RIMODAC2 - New model activation
Or is there alternate method in EWM?
Please advice.
Hi Experts,
Warehouse task not creating with right quantity for some products
For example suppose we have quantity of 240 CS and need to create 6 Warehouse tasks of 40 cs each but in the system only 4 warehouse tasks are created as below
80 cs
80 cs
40 cs
40 cs
So the workaround done is the tasks are cancelled for 80 cs and the tasks are created manually of 40 cs each.
Can you please throw some light on the issue to get what is the exact issue over here.
Regards,
Priya
Hi All,
Currently, in my EWM system, we have Physical Inventory document number range maintained for 2015 year and as we are in 2016, we are unable to create new PI documents. I know that we need to maintain new PI number range for 2016 year. However, I am in a confusion if I need to maintain it manually or there is any standard program to do it?
I checked in google and cannot find any standard program to maintain PI number range based on year. However, I need your expert advise on this.
Thank You,
Ravi
Hello Everyone,
One of my colleague recently received some raw materials using MIGO but somehow without entering any warehouse number. So we are now unable to see this materials in any warehouse and also unable to consume them in any way. Also we cannot transfer them to any warehouse or make a cancellation according to the material number. The system says the materials cannot be found. But when I take a report of 101 movements ay MB51, I can see clearly the materials are received but without any indicated warehouse number.
Could you please show me a way to access these materials and somehow transfer them back to the raw materials warehouse? And could you also suggest us what kind of corrective measures should we take for avoiding this kind of undesired situation in the future?
And one more thing; shouldn't SAP block us making such an incorrect receive with some red errors?
Thanks in adnavce for your help,
Fatih Savas
Quantity Classification:
This document illustrates the usage of quantity classification in EWM put away process.
Here one product is maintained with base unit of measurement in ‘EA ( each )’ and alternate unit of measurement in CAR ( carton )
1 CAR =24 EA
Weight of this product as 1 EA = 2 Kg means one CAR= 48 Kgs
In the warehouse one bin capacity is 100 Kgs and able to store 2 CARs per bin. And require getting individual WTs as per the bin (2 full cartons).
Master data in ECC
Material master
T Code : MM01/MM02/MM03
Alternate units of measurement in additional data
Purchase order unit to procure from the Vendor ( purchasing view )
Settings in EWM:
Ware house product master settings
T Code : /SCWM/MAT1
‘ Preferred UoM’ is CAR under the storage view of the warehouse product
Quantity classification is ‘cartons’ & preferred UoM is ‘CAR’ maintained in storage type data
Storage type settings
Spro-Img-SCM Extended Warehouse Management-Extended Warehouse Management-Master Data-Define Storage Type
Maintained Quantity classification under general control area in storage type
.
Maintain put away quantity classification as ‘cartons’ under put away control area.
Maintain ‘split during put away’ and ‘rounding after split ‘indicators in storage type
Maintain packaging specification for WT creation ( CAR wise )
T Code: /SCWM/PACKSPEC
Use condition technique for WT (standard: 0WHT )
Maintain product under content with quantity as 1 CAR
Maintain quantity classification ‘ cartons ‘ under warehouse tab against level ( this level is not relevant for HU in this example )
In storage type maximum capacity for one bin is 100 Kgs.
If we do the put away without Qty classification, can store 50 products (each product = 2Kg )
But, in this example quantity classification is maintained for the product as 1 CAR = 24 EA ( 48 Kg )
With the quantity classification, it can possible to store 96 Kgs only ( 2 cartons ) and WTs can be distributed carton wise quantity along with bin weight capacity.
Process :
T Code : ME21N
For inbound delivery
T Code: VL31N
Here IBD is created for 5 cartons, and 3 WTS can be created for three storage bins in EWM.
Check the inbound delivery notification in EWM
One inbound delivery created through PPF actions
Create WTs
Here WTs are created for three bins and put away split applied as per the quantity classification
Note : we can use the Qty classification as a serach parameter within the storage type search sequence also.
Hi Experts,
While doing bin to bin from over flow bin to H0* bin for some products it gives error as
" No partial quantities can be stored in storage type H0*
Can you let us know the issue is and provide the steps how to solve this one
Regards,
Supriya.
Hello,
I need EWM Roadmap for my presentation. I searched forum but only found strategy till 2014 which i already have.
Maybe Matthias would help?
Basic words can also help(must be official). Because i have to translate them into Turkish, i can't use your document directly.
What i require;
- Main goals about next releases
- Future plans(for the next 3 years)?
Please help,
Best regards.
Serhan.