Hi SAP Gurus,
We have created a new sub screen to include Batch field in the LM03 and LM05, by using user exits EXIT_SAPLLMOB_170,EXIT_SAPLLMOB_480.
the logic is working for validation of batch while doing the transaction, but problem is cursor is not moving from one field to another field automatically,
please suggest what are the settings and modifications to be done in logic and configuration, to move the cursor automatically.
Thanks in advance,
Pavan kumar.
Hi Experts,
Please let us know if you have already worked with subject mentioned scenario. I am facing issue that after goods receipt in ECC stock is not updated at storage location level and Inbound delivery is not getting created for this receipt even though it gives message 'Items are postes successfully'.This is stopping EWM process further.
Please advise.
Thanks & Regards,
Prashant
Hi Experts,
We checked configuration settings related to this but we could not find missing configuration. Right now we are not able to print label after we take usage decision. Please let us know your inputs on this.
We are using /SCWM/QINSP for usage decision.
Thanks & Regards,
Prashant
Hi Experts,
We are not able to print inspection label after usage decision in EWM. Please provide your inputs on this.
We are using tcode /SCWM/QINSP for usage decision.
Appreciate your time.
Thanks & Regards,
Prashant
Dear gurus,
When creating an physical inventory document only stock information will be displayed in the document. That means only HUs with at least 1 PC of any material inside of it.
But how will the physical inventory for empty HUs be performed? I mean when I have an HU wich due to the system got nothing inside but in the reality there are materials...or even not and I just would like to confirm that the HU is empty.
I searched through the whole EWM, but didn't found anything.
Thanks in advance
BR
Denis
Hi Experts,
Please help us if you have worked subcontracting process with EWM.
Right now we are able to receive finish good in ECC and EWM but we are not able to receive byproduct in goods receipt in ECC and hence in Inbound delivery of ECC. Further this can not be received in EWM as not in Inbound delivery.
The byproduct is already part of BOM and hence understand that it shall be automatically received in ECC with Inbound delivery creation and CIF to EWM.
Please give your insight on this and share document if you have. Appreciate your time.
Thanks & Regards,
Prashant
Hi,
Is it possible in EWM for a outbound delivery created in EWM WH1 and this WH is just for loading/PGI , but picking & packing must happen from EWM WH2. Both are having 2 different S/L but belongs to a single plant.
Please let me know.
Hello Experts,
Can anyone tell me why POSC steps are placed in WOCR for the outbound and in WPT for Inbound?
Hello all,
I'm building a demo for an SAP EWM system. It's installed on an existing SCM system, and is connected to ECC 6.0.
The replication of Inbound Deliveries from ERP to EWM is going fine. However, when I try to create an Inbound Delivery in EWM manually (tr. /SCWM/PRDI), I get the following error message:
Unknown error has occurred in target system - Message no. /SCWM/DELIVERY_UI056
Does anyone know how to solve this error?
Thanks in advance, best regards,
Oliver
Hello experts,
I'm tring to do a GR from production.
RF> Inbound Process> Reciving of HU> Rec. HU BY Manufacturing Order> Rec.HU by HU.
I select my Work Center, F915: wich has following characteristics:
And I'm getting this error:
E: Storage bin for goods movement postings not determined (/SCWM/DELIVERY012)
why if the Work center is assigened to a bin, the system does not find a bin to GR?
many many thanks for your help
Cheers
Natalia
Hi All,
I am doing the following scenario and I have all the config and master data setting that is needed to do cross dock.
This scenario is cross dock from the Inbound side
1. Create Sales order for qty 10 in ECC and that is replicated in EWM.
2. Wave the ODO in EWM and that creates an WT to pick 10 qty from the GNL location. The WT is still open and I did not confirm it yet. The WT has source and destination HU determined. The WO has Queue assigned based on Queue determination
3. I now create an Inbound delivery in ECC for same prod and Qty 10 and it is replicated in EWM.
4. In EWM, I pack the qty 10 in a HU and then I do a 'Goods Receipt' to the GR-ZONE. I don't have a POSC
5. Now I am manually creating a putaway WT for the ID.
Now this is where my problem is. I was hoping that system will cross dock this inbound delivery with the outbound delivery and in doing so, it will cancel the open Pick WT that was created for the ODO and will create a new cross dock WT but system did not do so. It is creating a direct putaway WT to the GNL location.
ALSO, this process works when for the ODO, I do not create any open WT. In that case, during putaway WT creation it is cross docked.
So the question is, does EWM consider open WT's during XDock? In some texts, SAP writes that the open WT's will get cancelled and cross docked but that is not happening.
Thanks for your inputs and help
James
Hi Everyone,
I'm trying to remove a vehicle that's stuck in Yard Management (under a warehouse) but I had no luck so far. The problem is that the Handling Unit was set to deleted and I haven't been able to change its status through HU02 or even using HUMO. The system status right now is DLTD. When I try to delete the vehicle in YM, it says that I can't because of the status that's in right now.
Is there a way to change the system status back to 'PLND' for example?
Also, if I could find a way to set the user status, would it prevail over the system status?
If more information is needed, I'll gladly provide it.
Thanks everyone!
Hello Experts,
I am trying to create bin sorting but not able to generate right bin sorting. I have a storage type 0050 and bin structure is
Template NNNNCNNCACNCCCCCCC
Structure AAAA SS L B
Start Value 0810-11-E-1
End Value 0812-28-G-6
Increment 01 01 1 1
I want bin starting with 810 to be assigned to one activity area 0050 and the ones starting with 0811 to be assigned to another activity area 0051.
Please refer to the screen shots attached and help me find out what is wrong.
Dear experts,
sometimes I get the situation when the materials with different stock types or just different materials are packed in one HU (100004):
Is there any checkbox for HU-Types or something like this to set, that only one material (material number) with one stock type can be packed in one HU?
Thanks in advance
BR
Denis
Hi Experts, I want to get the warehouse inventory report to be receive by email in excel format every month end. also i have 4-5 transaction for that I need the report by email in excel format in specific frequency.
Can some one help me on this?
Regards,
Rushikesh
Hello Experts,
I have an issue in transaction /SCWM/DCONS,when I try to give my warehouse and my work center DEKO, I am getting the error "Selected work center does not fit the transaction".
I have already created a work center layout and checked "deconsolidate".Also assigned this layout to my work center and have successfully been able to generate warehouse task also for deconsolidation.
Please help me with that.
Regards,
Khushboo
Hello Expects,
I'm using EWM V9.2
I need to pack nested HU at the end of the production line. Pieces with serial numbers> Boxes> Pallets.
any suggestions how can I achieve this?
I have a created 2 levels packing spec.
I'm trying to use: RF Tcode:. RF> Inbound Process> Reciving of HU> Rec. HU BY Manufacturing Order> Rec.HU by HU
many many thanks in advance
Natalia
Hello Experts,
hope you can help me again,
I've set up a WH Level serial number profile in ECC and EWM, I have asigned the profile in the material in ECC and Cif it over to EWM. I have also assigned the "SN" Quantity Offsetting Role to all item delivery profiles. Work Center is also set up for serial numbers.
I have tested using Tcode: /SCWM/GRPI - GR Preparation - Production; system asks to populate the serial numbers & creates the inbound delivery with no issues.--> it is working.
The issue is that when I use RF Tcode> Inbound Processes > Receiving of HUs > Receiving Hus by Manufacturing Order>Rec. HU by HU (fast path
3462). I'm getting error message just after populating the WC and the Manufacturing order: E: Cannot process products with serial numbers or valuation qty for order 1000573 (/SCWM/RF_EN243)
Do I need to activate anything in Radio Frequency for serial numbers? I haven't found any documentation that talks about it.
Many thanks in advance for your reply
Natalia
Hi,
When i create inbound delivery in ECC system(VL31N),i am not able to find the inbound delivery in EWM system even i correctly done the integration between ECC and EWM.
Can anyone to help to solve this issue..
Regards,
Asirvad
This RF cookbook helps developers to begin working in the RF framework. It answers frequently asked questions and helps to avoid common errors. This RF cookbook also provides some useful tips about the standard layout and screen structure that should be applied in the standard transactions.