Hi EWM experts, Though we setup Pack. spec in our system , Pack. Spec not determined for any of IBD and did not create any HU automatically. Even system does not show any log/error to know the reason. Any help on this.
↧
Packaging Specifications not determined for any of IBD, HU not automatically created and assigned with IBD.
↧
EWM - Bin Angle
Hello,
I am very new to EWM so my knowledge is limited. My company will be implementing EWM within the next year and a half and we are trying to better understand the different functions of EWM.
Could you please explain what the bin angle is and how to use it?
I know it defines one corner of a bin, but does it actually pertain the the degrees a bin can be tilted?
↧
↧
Different Stock types in the same HU....
Hi Team,
Is there a possibility that i can have the different stock types in the same HU in SAP EWM.If we have any options please let know.
Thanks,
Kris.
↧
Bin Angle Settings for Warehouse
Hello,
Please see the above picture. It compares where our current distribution center (in red) physically faces, versus the true compass directions (N, S, E, W)
Our warehouse physically faces 16 degrees from true North. A lot of our aisles run parallel to this. My question is if we have a bin (1) that faces with the picking side outward (black arrow), would it be set as 16 degrees?
Similarly, if we have a bin (2) that faces the opposite direction with the picking side outward, would it be set as (16 + 180) = 196?
Please advise.
Best,
Dan
↧
Mass Confirm WT
Dear Experts,
We will have scenarios where we need to confirm many stock removal WT in 1 transaction (>100 items). Is there any way to confirm multiple WT at the same time? For as far as I know in the /SCWM/TO/Conf t-code, confirm WO and confirm WT would use the same function.
Best and Thanks,
Eddie
↧
↧
Werehouse Order Status Change
Hi,
I am looking for a function module/BAPI or anyway to change the status of a WHO from Open to In-Process in EWM module.
Thanks in Advance.
Ramesh
↧
Releasing the waves on a particular week day based on customer
Hi,
We have a requirement to release the waves on a particular week day based on the customer, like for one customer we have to release the wave on Monday and another one on Wednesday. Is there a way to achieve this functionality. Your help is greatly appreciated.
Regards,
Sobhan
↧
Mixed outbound deliveries items
Hello experts,
I have an outbound delivery with two items. Each of them have a different storage location.
One storage location is managed by EWM the other one is not managed by EWM (no assignment to a warehouse number in ECC).
After saving the outbound delivery (VL01N) both items are transfer to EWM. In EWM I have an error because the item which is not managed by EWM could not created.
How can I avoid that the item which is not managed by EWM will transfer to EWM? I only want the item which is managed by EWM. The other should be processed seperatly. The delivery split seems not to work here.
What can I do?
Thanks!
Ralf
↧
Relationship between work center and handling unit
Hi All,
I would like to know if there is an FM or a table using which I can check if a handling unit is present in a work center. Please help.
Thanks and Regards.
↧
↧
Full pallet pick in EWM
Dear All ,
Greetings for day , Thanks in advance for your kind cooperation
Kindly guide steps to achieve full pallet picking functionality in EWM.
I don't have option 5 in WPT config .
Thanks
Jinoy
↧
SAP EWM - Kit to stock with replenishment
Hi Experts,
Scenario
We do kitting for an FG before moving the material to forward pick area. Automatic replenishment is activated for the forward pick area. So warehouse task is getting created once the stock goes below the minimum quantity maintained in product master.Is it possible to automate VAS kit to stock order whenever replenishment is triggered for this material.
I have configured automatic replenishment and Kit- to-stock scenario separately.
As per current config for Kit to stock we need to create the VAS order manually with order type KTS. It is picking BOM from ERP and creating inbound delivery for header material and outbound delivery for components.
How can I link replenishment and VAS kit to stock order creation ?
Regards,
Venky
↧
Inbound delivery for Production Order in EWM
Hi
We have a scenario of creating Inbound Delivery, Pack (HU), GR and Putaway via an interface in EWM from an external system. Basically the transaction of /scwm/grpi and /scwm/prdi. I found this below thread which is little old. Could you please confirm if this is the only process or is there a better solution.
http://scn.sap.com/thread/1557452
Any useful information would help.
Thanks, Raj
↧
Creation of Inbound delivery in EWM
Hi All,
I am trying to find out a way to create inbound delivery technically through a custom program.Can anybody suggest me is there any FM/BAPI or any other method to create an Inbound delivery in EWM exists?
BR,
Anil
↧
↧
Smartform for EWM Shipment
Hi,
I am new to SAP EWM.
How to check for the smartform in EWM for shipment i.e. t code /SCWM/TU.
My requirement is to assign the create a BOL smartform and assign it at the time of 'Check out', after the delivery is assigned.
I also wanted to know whether is there any Driver Program for Shipment BOL Smartform.
ReGaRdS,
Dinesh
↧
How to auto create HU Warehouse Task?
Dear Experts,
Our Goods Receive Business scenario is
1. Filled Batch in EWM Inbound Delivery
2. Manual Pack product to Handling unit
3. After packing,we get HU warehouse request only ,but not create Warehouse Task automatically .
We think that EWM should create HU Warehouse Task automatically
Can anyone help us to figure out that problem?
p.s we don't use POSC,
Thank you
Chang
↧
eWM - ERP HU integration
Hi experts,
I'm trying to set up a basic inbound flow where the goods will be packed in eWM via the inbound delivery. I would expect the handling unit created in eWM to be transfered to ERP upon goods receipt posting, but it stays stuck in the queue with message :
There is no handling unit with identification XXXX
Now, I have entered the queue itself to see what it contains, and I am surprised to see that nowere is the HU type or PackMat type part of the queue. The main information contained is :
HANDLING_UNIT_HEADER level :
* ERP delivery number
* HU number
* HDL_UNIT_EXID_TY (type of external HU identifier) = "F" (No rg object HU_VEKP external interval - SSCC18 before GI)
HANDLING_UNIT_ITEM level :
* HU number
* ERP delivery number
* Material packed
* Quantity
Could you explain what are the steps to be done both in ERP and in eWM to ensure that the handling unit from eWM are successfully sent to ERP ?
Thank you
↧
How to use PPF customizing Auto GR after packing
Our Goods Receive Business scenario is
1. Filled Batch in EWM Inbound Delivery
2. Manual Pack product to Handling unit
3. After packing, Automatic Good Receive
4. Then create Warehouse Task automatically .
Question
We want to know how to use PPF customizing Auto GR after we Pack product to Handling unit?
Can anyone help us to figure out that problem?
Thank you
Chang
↧
↧
Query regarding "TDELIVERY - Delivery Date/Time" & "TOUTYARD - Departure from Yard" in the ODO
Dear Gurus,
Could anyone explain how the fields "TDELIVERY - Delivery Date/Time" & "TOUTYARD - Departure from Yard" is getting populated or how its being fetched in the ODO, in "Dates/Times" tab in PRDO screen.
_310%20Maintain%20Outb.%20Deliv.%20Order%20-%20Warehouse%20No.%20Y49B%20(Time%20Zone%20UTC+4).png)
↧
EWM Plant - four storage locations
Hi
Can we have following structure for eWM ?
LSP warehouse provides warehouse facilities for customers. Stocks are recevied for different customers in warehouse.
ERP Plant : 0001
Storage Locations :
- ROD1 & AFS1 --> In LSP , stocks for a particular customer are received in this storage locaiton.
- ROD2 & AFS2 --> Stocks for another customer are received in this storage location.
The stocks for different customers are to be tracked in EWM.
Party entitiled to dipsose is linked to Plant , so how to track stocks from different storage locations?
Any other criteria which can be used for tracking customer stocks in LSP ?
Regards / Vinod Sedani
↧
Language key not defined (CIF)
Hi experts,
currently we get an error message "Language key not defined" during the transfer of a customer from ERP to EWM (CIF - CFM1/CFM2).
Therefore no business partner in EWM is created. I read something about "One-time account" (1957563 and 1975421).
But we also have the problem for non "One-time account" customer.
How can I solve this problem?
Thanks!
Ralf
↧